This video is major to introduce mail alarm function, how to use it.
Mail alarm function
Hello everyone, welcome to the touch screen operation video tutorial, today we will explain the email alarm function. Alarm function is when the alarm is generated, send an e-mail to the corresponding mailbox, here we need to pay attention to is to use the e-mail alarm function, the touch screen must be connected to the external network, otherwise it can not send e-mail, in the HMI settings inside, there are two ways to automatically obtain and static distribution settings, which way to use is based on the site to choose the way to access the Internet, here choose to automatically obtain the IP address, if you choose to static distribution of IP addresses, to set up according to the site IP. If you choose static allocation address, you should set it according to the site IP, click OK after setting, there is a mail setting under system setting, open it, you need to check the use of mail sending and receiving function, the default is not checked, SMTP setting is to say that the mailbox of sending mail is necessary to check the SMTP function, SMTP setting is different for each mailbox, you can check it by yourself, the server The server is smtp.163.com, because here is the 163 mailbox as an example, the password is the smtp account password, server verification, some mailboxes need to verify the server, according to the actual situation to set the port number, different mailboxes port number is not the same, this is also need to find out for themselves, the sender name can be named casually, the mailbox is the 163 mailbox, the output The output information has the sending status and the server return information, you can display the sending status and the return status, you can use the string display file to display, the recipients we can add multiple recipients, click on the plus sign to add contacts, click on the minus sign to delete contacts after selection, then open the alarm event, you can add several alarms inside, and then select the email notification recipient when the action is triggered on the right. The following Use alarm content as title is optional, after using the alarm content as title is checked, the content "test mail alarm" on the right will be used as the title, of course, you can also set the title and content yourself without checking the box, click OK after setting, then add a Then add a switch element LB0, take the inverse, set the alarm trigger and recovery, and then add two numerical display elements to display the status of the mail sent and the number of lines of return information characters and the number of characters per line can be set according to the actual situation, the return status lw500 is also a character display element, the same can be set by themselves, after the settings are complete, you need to download the program to the touch screen inside, use the network cable to connect the touch screen After setting, you need to download the program to the touch screen, connect the touch screen and the external network with a network cable, trigger the LB0 alarm, and then send the state and return the state inside you can see whether the specific mail alarm is sent successfully, and if sent successfully, the recipient's mailbox will also receive the alarm information, you can specifically combine the actual use of the test. This is the end of the mail alarm function, thank you for watching.
Get in touch
Please provide us with the information below to complete your request. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
Copyright © 2023 Wuxi Mochuan Drives Technology Co.,Ltd 无锡默川传动技术有限公司- www.mochuan-drives.com All Rights Reserved.